2016年3月16日星期三

Rolling process in Steel rolling plant

Rolling of steel is one of the most important manufacturing processes for steel. Steel rolling is the process of plastically deforming steel by passing it between rolls. Rolling is defined as the reduction of the cross sectional area of the steel piece being rolled, or the general shaping of the steel products, through the use of the rotating rolls.



The initial rolling of steel is done in a hot rolling mill where blooms and slabs are rolled down to various rolled products such as plate, sheet, strip, coil, billet, structures, rails, bars and rods. Steel rolling can produce a wide range of products. The width of a rolled product can vary from a few millimeters to several meters while the thickness can vary from 0.1 mm to more than 200 mm. The rolled section can be square, rectangular, round or shaped sections.

Rolling of steel is done not only to achieve the desired cross section but also to get the desired properties of steel. Rolling of steels imparts strength and favourable grain orientation. Further heat treatment processes incorporated during controlled rolling helps in modification of steel microstructure to give the steel desired properties.

Fujian Putian Geili Machinery manufacturing Co., Ltd was founded in 2006, the registered capital of 20,000,000 yuan.There will be good cooperation chance If you

1. Have the raw material of billet or steel scrap2. Want to build a steel factory3. Don't know how to process or design the production line4. Want to add the production line5. Want to purchase the accessories6. Want to reduce the invest budgets since the high cost from European countries and long term RIO period

Rolling mill for Rolling process/ Rolling plant

4 条评论:

  1. Guys you have made such a Amazing Article & Information about Steel Rolling Plant Parts, this is the best place to find reliable sources about manufacturing and supplying in india, people who are looking for Steel Rolling Plant Parts Manufacturers and Suppliers, Exporter this must be a right place for them.

    回复删除
  2. Steel Rolling is a great option when it comes to getting round, square, and rectangular shapes. To meet the exact radii, materials are rolled in any form. Getting roll angle, beam, square and rectangular
    tubing, channel, and heavy bar are all more accessible options through the Davi machine.
    In fact, high-efficiency machines can get a better edge in customizing and offering quick turn-around work. Plate Rolling Plant work with greater efficiency for different small, to considerable turn-key projects. These plate rolling plants are capable of rolling material ½” thick, 10’ wide, and up to 14’ diameter to be precise.
    Indeed, a great blog describing details and entire process on steel rolling.

    回复删除