Induction furnace is the device converting three phase power current into single phase intermediate frequency current and enabling metal to produce eddy current loss through electromagnetic field induction to achieve heating and melting and is applicable to melting, heating or holding of steel, copper, iron, aluminum, zinc, tin, nickel silver and other ferrous or nonferrous metal and alloy material as well as heating treatment prior to forging, sintering and tube-bending forming in casting and melting industries.
Performances and features
1) Using a zero-voltage scanning soft-start mode, in any case may at any time to start or stop, will not have impact on power supply.
2) Fast smelting with low production cost; low-pollution and environment-friendly;
3) A direct effect from the cold furnace melting. Dissolved material will be fully dumped clean. Molten material is easy to replace.
4) Power adjustment flexibility. Be able to continuously smooth adjustment. Temperature uniformity can be easily controlled. Oxidation burning is less.
5) Furnace shell using cast aluminum or steel structure, small footprint; furnace flip dump convenience, according to the need to use electric, manual, hydraulic tilting furnace and other means.
6) Designed to automatically adjust angle of inverter circuit that can automatically adjust the load impedance match, without adjustment of capacitance compensation and always run the equipment in good working condition; power supply system diagnostic error function, easy maintenance.
Company profile:
We are rolling mills and continuous casting machine manufacturer in China, which the final products are round steel, deformed steel and wire rod. There will be good cooperation chance If you
1) Using a zero-voltage scanning soft-start mode, in any case may at any time to start or stop, will not have impact on power supply.
2) Fast smelting with low production cost; low-pollution and environment-friendly;
3) A direct effect from the cold furnace melting. Dissolved material will be fully dumped clean. Molten material is easy to replace.
4) Power adjustment flexibility. Be able to continuously smooth adjustment. Temperature uniformity can be easily controlled. Oxidation burning is less.
5) Furnace shell using cast aluminum or steel structure, small footprint; furnace flip dump convenience, according to the need to use electric, manual, hydraulic tilting furnace and other means.
6) Designed to automatically adjust angle of inverter circuit that can automatically adjust the load impedance match, without adjustment of capacitance compensation and always run the equipment in good working condition; power supply system diagnostic error function, easy maintenance.
Company profile:
We are rolling mills and continuous casting machine manufacturer in China, which the final products are round steel, deformed steel and wire rod. There will be good cooperation chance If you
- Have the raw material of billet or steel scraps
- Want to build a steel factory
- Don't know how to process or design the production line
- Want to add the production line
- Want to purchase the accessories
- Want to reduce the invest budgets since the high cost from European countries and long term RIO perio
没有评论:
发表评论